167.34 EUR

excl. VAT, excl. transport

This email address is being protected from spambots. You need JavaScript enabled to view it.

Graphical panelmeter with RGB backlight for analogue signal 2 x 0/4 - 20 mA with USB.

Graphical measuring instrument for electrical parameters and process display with RGB backlight - unique, innovative, and multifunctional.
The measurement mode analogue signal 0/4 to 20 mA DC is supported at two measurement inputs. The multi display is able to display two parameters simultaneously. Thresholds can be associated with individual warning colours. Minimum and maximum values are recorded and can be displayed and reset via jumper or an external switch. Measured values of one parameter are recorded over a timespan of 3 minutes up to 14 days. The timebase as well as the display of the measuring history can be activated by an external switch. The measured values remain stored as long as the device is supplied with voltage. The following parameters can be adjusted using the USB configuration software: scale endpoint, scale caption, display style (pointer, tachometer, bar graph, and more), splash image, backlight colour, thresholds for alarm output, threshold warning colour (light, blink), hysteresis, and more. Recorded measurement values can be read and a continuous transmission of the actual measuring value can be enabled. Using the software, values can be viewed and exported as CSV.


  • Graphic display 16 grey levels with RGB backlight
  • Pointer and digital display
  • Multi display of up to 2 parameters
  • Measuring range ampere 2 × 0/4 bis 20 mA DC for analogue signal
  • USB interface, galvanically isolated
  • Adjustable scale endpoint
  • Recording of measurement over up to 14 days
  • Alarm outputs with adjustable thresholds, galvanically isolated
  • Individual alarm backlight colour
  • User splash image
  • Different display styles, e.g. tachometer, bargraph, timebased view
  • Real-time transmission of measured values
  • Integration of measured values
  • Supply 12 to 24 V AC/DC or via USB (min. 5 V), galvanically isolated
  • Accuracy ±0.5 % true RMS
  • Windows software for individual configuration and recording of measured values


Supply 12 – 24 V AC/DC ±10 % or via USB (min. 5 V), galvanically isolated
Display LCD graphic display 192 × 160 pixels
Measuring range ampere 20 mA AC/DC (max. 100 mA)
Accuracy ampere 0,5 % true RMS
Internal resistance ampere 6,2 Ω
Recording of measurement 3 mins. to 14 days
Alarm outputs 2 optocoupler outputs max. 30 V DC, 50 mA
Operating temperature 0 °C to +50 °C
Storage temperature -20 °C to +70 °C
Dimensions 72 mm × 72 mm × 58 mm
Panel cut-out 68 mm × 68 mm
Depth 50 mm (without plugs), 58 mm (with plugs, cable direction rear facing)
Fixation Bracket
Protection front IP65 when mounted with gasket (separately available)
Manufacturer TDE Instruments


Order Information:
TDE Instruments Digalox DPM72-MPPA Graphical DIN-panelmeter with RGB backlight for analogue signal 2 x 0/4 - 20 mA with USB.